PreparationFor assistance, please call: 1-800-211-PANA(7262) 13Programmable SettingsDisplay LanguageYou can select either “English” or “Spanish” as the display language. The factorypreset is “English”.• If you select a language you cannot read, change the display language againusing direct commands (p. 53).Dialing ModeIf you have touch tone service, set the dialing mode to “Tone”. For rotary or pulseservice, set to “Pulse”. The factory preset is “Tone”.1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Scroll to “Change language” by pressing [d]or [B], then press Select.4 To change from English to Spanish, pressEspañol.To change from Spanish to English, pressEnglish.• The display changes to the selected language.• You can also select a language by pressing [d] or[B].5 When Spanish is selected, press Salvar, then press [OFF].When English is selected, press Save, then press [OFF].1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Scroll to “Set tel line” by pressing [d] or[B], then press Select.4 Press Select at “Set dial mode”.5 Select “Pulse” or “Tone” by pressing [d] or[B].6 Press Save, then press [OFF].HandsetInitial settingBack SelectK dB LChange languageBack SelectK dB LDisplay:EnglishEspañol SaveK LHandsetInitial settingBack SelectK dB LSet tel lineBack SelectK dB LSet dial modeBack SelectK dB LSet dial mode:ToneBack SaveK dB L