Preparing the Answering System24Recording ModeTwo recording modes are available. The factory preset is “Standard recording(16min)”, which provides more recording time (16min) and standard sound quality.“Enhanced recording (8 min)” provides less recording time (8 min) but clearersound quality.Message AlertYou can select whether or not the Ringer/Message Alert indicator on the handsetwill flash slowly when new messages have been recorded (p. 58). The factorypreset is OFF.• The Ringer/Message Alert indicator will not flash for new messages while thehandset is in use.• The Ringer/Message Alert indicator acts both as a ringer indicator and as amessage alert indicator. This indicator will flash rapidly when a call is receivedwhether this feature is on or off.• Battery operating time will be shortened when using this feature (p. 11).1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Press Select at “Set answering”.4 Scroll to “Recording mode” by pressing [d]or [B], then press Select.5 Select the recording mode by pressing [d] or[B].• You can also select the recording mode bypressing [1] (Standard) or [2] (Enhanced).6 Press Save, then press [OFF].1 Press [MENU].2 Scroll to “Initial setting” by pressing [d]or [B], then press Select.3 Scroll to “Message alert” by pressing [d] or[B], then press Select.4 Select “On” or “Off” by pressing [d] or [B].5 Press Save, then press [OFF].HandsetSet answeringBack SelectK dB LRecording modeBack SelectK dB LStandardrecording(16min)Back SaveK dB LHandsetMessage alertBack SelectK dB LMessage alert:OffBack SaveK dB L