Panasonic KX-TG2421NZ Operating Instructions Manual

Panasonic KX-TG2421NZ Operating Instructions Manual Manual pdf 30 page image

Programmable Settings30Telephone settingsRecall timeThe recall time depends on your telephoneexchange or host PBX.You can select: “90ms” (milliseconds),“100ms”, “110ms”, “250ms”, “300ms”,“400ms”, “600ms” (default), or “700ms”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set tel line” by pressing{V} or {^}, then press {>}.4 Scroll to “Set recall time” bypressing {V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.6 Press {Save}, then press {OFF}.Note:L The setting should stay at 600 ms unlesspressing {Recall} fails to pick up theCall Waiting call.L If the unit is connected via a PBX, certainPBX functions (call transferring, etc.)may not work correctly. Consult yourPBX supplier for the correct setting.Line modeThe line mode is preset to “B” andgenerally should not be adjusted. If “Linein use” on the handset is not displayedproperly, the line mode selection isincorrect. Set line mode to “A”.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set tel line” by pressing{V} or {^}, then press {>}.4 Scroll to “Set line mode” by pressing{V} or {^}, then press {>}.5 Press {V} or {^} repeatedly to selectthe desired setting.6 Press {Save}, then press {OFF}.Storing your area codeWe recommend storing your area codebefore using Caller ID (page 24). Callsfrom the same area will be recorded in thecaller list without the area code. You do nothave to remove it before calling back thecaller or storing in the phonebook.1 Press {MENU}.2 Scroll to “Initial setting” bypressing {V} or {^}, then press {>}.3 Scroll to “Set area code” by pressing{V} or {^}, then press {>}.4 Enter your area code (max. 8 digits).L To correct a digit, press {<} or {>} tomove the cursor, then press{CLEAR}. Enter the correct number.5 Press {Save}, then press {OFF}.To erase your area codePress and hold {CLEAR} in step 4, press{Save}, then press {OFF}.Note:L The use of this feature can prevent aNational Call from being dialled. Forexample, the “03” for South Islandcallers will be omitted and will thereforeprevent a National Call to other areas ofthe South Island.