Answering System FeaturesFor assistance, please call 1-800-211-PANA (7262). 43To play back the greeting messagePress {GREETING CHECK}.Erasing your greeting messagePress {GREETING CHECK}, and thenpress {ERASE} while your greetingmessage is playing.L If you do not re-record your greetingmessage, the unit will use a pre-recorded greeting message.Pre-recorded greeting messageIf you do not record a greeting message,one of 2 pre-recorded messages will beplayed when a call is received dependingon the caller’s recording time (page 49).– When the recording time is set to“1min”, “2min”, or “3min”:“Hello, we are not available now. Pleaseleave your name and phone numberafter the beep. We will return your call.”– When the recording time is set to“Greeting only”:“Hello, we are not available now. Pleasecall again. Thank you for your call.”To play back the pre-recorded greeting,press {GREETING CHECK}.Turning the answeringsystem on/offPress {ANSWER ON}.L When the answering system is turnedon, the ANSWER ON indicator lightsand the unit announces “Answer set”and the day and time.L When the answering system is turnedoff, the ANSWER ON indicator turns offand the unit announces “Answer off”.Screening your callsWhile a caller is leaving a message, youcan listen to the call through the base unit’sspeaker. To adjust the speaker volume,press {>} or {<} repeatedly.You can answer the call by pressing {C}or {s}.To turn off the call screening featureTurn the base unit’s speaker volume off bypressing {<} until “0” is displayed.Note:L If you adjust the speaker volume whilelistening to messages or talking on theintercom, the speaker volume for callscreening will be turned on again.{ANSWER ON}{<}, {>}ANSWER ONindicator