Panasonic KX-TG2511HG Operating Instructions Manual

Useful Information35Caller IDAnswering system (KX-TG2521)Problem Cause/solutionCaller information is not displayed. L You must subscribe to a Caller ID service. Contactyour service provider/telephone company fordetails.L If your unit is connected to any additional telephoneequipment, remove and plug the unit directly intothe wall jack.L If you use a DSL/ADSL service, we recommendconnecting a DSL/ADSL filter between the baseunit and the telephone line jack. Contact yourDSL/ADSL provider for details.L Other telephone equipment may be interfering withthis unit. Disconnect the other equipment and tryagain.Caller information is slow todisplay.L Depending on your service provider/telephonecompany, the unit may display the caller’sinformation at the 2nd ring or later.L Move closer to the base unit.The name stored in the phonebookis not fully displayed while anoutside call is being received.L Edit the phonebook entry name to fit in 1 line of text(15. oldal).Problem Cause/solutionThe unit does notrecord new messages.L The answering system is turned off. Turn it on (23. oldal).L The message memory is full. Erase unnecessary messages(25. oldal).L The recording time is set to “Csak üdvözlés”. Change thesetting (27. oldal).L If your own greeting message is not recorded properly, callersare unable to leave a message. Record your own greetingmessage again (23. oldal).L If you subscribe to a voice mail service, messages are recordedby your service provider/telephone company, not yourtelephone. Change the unit’s number of rings setting or contactyour service provider/telephone company (26. oldal).My own greetingmessage cannot beproperly heard.L Record your own greeting message again (23. oldal).I cannot operate theanswering system.L A caller is leaving a message. Wait for the caller to finish.L The handset is too far from the base unit. Move closer.TG2511_2521HG(e-hg).book Page 35 Thursday, January 21, 2010 3:16 PM