Panasonic KX-TG2563S Operating Instructions Manual

Also see for KX-TG2563B: Operating instructions

Contents

Panasonic KX-TG2563S Operating Instructions Manual Manual pdf 32 page image

Using the Caller ListStoring Caller List Information in the DirectoryYou can store names and phone numbers that are in the Caller List intothe directory.Make sure the unit is in the standby mode initially.Press [_ or [_ to enter the Caller List.2 Press [_ or (A0 repeatedly to find thecaller you want to store in the directory,and press FWD/EDIT [] (Yes key).,,If the number requires editing, see page 31.Press [_[} or 1_ to select "Savedirectory", and press FWD/EDIT [](Yes key).T_0 new calls_=DirectoryCINDY TURNER1-234-456-7890II:20A JAN.12 X3_EditsavedirectoryYA _:YesEdit ]_Save directoryYA _=YesEnter name_ T:NextEnter nameCINDY TURNkR4_ ¥=NextI °CINDY TURNER12344567890If there is no name information for thecaller, "Enter name" will bedisplayed.a) If a name is not required, press [_(Next key) and press FWD/EDIT [](Savekey).b) If a name is required, enter the name(p. 40). When finished, press [_(Next key) and press FWD/EDIT [](Save key).oA beep sounds.,,To continue storing other items, repeat fromstep 2.,,To return to the standby mode, press[FUNCTION/EXIT/CH}.•You can exit the programming mode any time by pressing [FUNCTION/EXlT/CHJ•If the display shows "Directory lull" in step 3, press IFUNCTION/EXlT/CH]to exit the list. To erase other stored items from the directory, see page 45.,,Afterthe maximumof 50 items has been stored,"Directory full" is also displayed.,*You cannot store caller information in the directory if a phone number is notdisplayed.•It 3 beeps sound and the display shows "Save error", move closer to the baseunit and start again from step 132