Panasonic KX-TG2583S Operating Instructions Manual

Also see for KX-TG2583S: Operating instructions Operating instructions Operating instructions Service manual Service manual

Contents

Panasonic KX-TG2583S Operating Instructions Manual Manual pdf 38 page image

Using the Caller ListStoring Caller List Information in the DirectoryYou can store names and phone numbers that are in the Caller List intothe directory. Storing must be carried out with the handset.Make sure the unit is in the standby mode initially.Press [_ or [_) to enter the Caller List.2 Press @_or (_ repeatedly to find thecaller you want tO store in the directory,and press FWD/EDIT (_ (Yes key).•ff the number requtres editing, see page 36.Press (_ or _ to select "SavedirecLory", and press FWD/EDIT (_(Yes key).¥_0 new calls_=DirectoryCTNDY TURNER X31-234 456 7890II:20A JAN,12_Edit directoryT_ ave _=Yes]Edit directory ],SaveYA _:Yes]I °Enter name_' ¥:Next[ °ENter _ameCINDY TURNER_ ¥:NextCINDY TURNER12344567890If there is no name information for thecaller, "Enter name" will be displayed.a) If a name is not required, press(Next key) and press FWD/EDIT [_(Save key).b) If a name is required, enter the name(p 45). When finished, press (_(Next key) and press FWD/EDIT [_(Save key).• A beep sounds.,,To continue storing other items, repeat fromstep 2.,,To return to the standby mode, pressFUNCTION/EXIT/OH J.•You can exit the programming mode any time by pressing [FUNCTION/EXlT/CH].,,If the display shows "I); recLory full" in step 3, press IFUNOTION/EXIT/CH]to exit the list To erase other stored items from the directory, see page 51.• After the maximum of 50 items has been stored. 'Di_. e<". ory [J 11" is atso displayed.,,You cannot store caller information in the directory if a phone number is notdisplayed• If 3 beeps sound and the display shows "s._, ,_r __ . move closer to the baseunit and start again from step 1.38