Panasonic KX-TG2584 Operating Instructions Manual

Contents

Panasonic KX-TG2584 Operating Instructions Manual Manual pdf 39 page image

Cordless Telephone39The Caller ID Number Auto Edit Feature(Cordless\Handset)There are 3 patterns of phone number (a, b, and c, p. 37, 38). Thisfeature allows your phone to automatically edit an in-coming Caller IDnumber into one pattern you preferred, and display the Caller ID numberwith that pattern on the base unit and cordless handset automatically.After this feature is activated, Caller ID numbers coming from consideredarea codes (201, for example), from which the Caller ID numbers havebeen chosen to follow the desired pattern (7 digit pattern, for example),will be automatically edited from other patterns (11 digit pattern, forexample) into the same pattern you have previously selected (which is7 digit pattern, in the example).Up to 4 area codes are allowed for this feature for pattern a and b(p. 37, 38). The Caller ID numbers can be edited automatically on thebase unit and the cordless handset separately. Changes made on thecordless handset cannot be used to make a call with the base unit andvice versa.To activate this feature, you must 1) set this feature to on, and 2) makean out-going call from Caller List (p. 36) with a number which has one of3 patterns that you have edited with considered area code, and that youprefer to be followed by future Caller ID numbers, so that in the future allthe Caller ID numbers coming from the same area code will be displayedin the same pattern.The Caller ID number Auto Edit feature is preset to ON at factory.≥If you fail to reach your destination when making the call, the phone number youdialed might have an incorrect pattern, please edit the phone number withanother pattern (p. 37, 38).For example, if you move to another area, you may need to turn thisfeature to OFF to erase previously edited area codes. Then, if still need,you may activate this feature again.Make sure the base unit and cordless handset are not being used.1 Press (MUTE/FUNCTION).2 Scroll to “Program” by pressing (›) or(‹).3 Press (fl) (Yes key).1Save directoryRinger volume43 1=YesLCD contrast1Program43 1=Yes1Set flash timeSet line mode43 1=Yes“For assistance, please call: 1-800-211-PANA(7262)(Continued ¤)