Panasonic KX-TG2611C Operating Instructions Manual

Useful Information20Wall mountingConnect the telephone line cord. Mountthe unit by inserting the mounting pins intothe round openings on the adaptor (for pin2, use round cut out at the bottom of theadaptor if you are using the 4 inchesphone plate), then sliding the unit down tosecure it.Connect the AC adaptor to power outlet(page 7).L There are two common types of wallphone plates. The distance between 1and 2 may vary depending on the sizeof the wall phone plate installed.RF Exposure Warning:The product complies with IC radiationexposure limits set forth for anuncontrolled environment. To complywith IC RF exposure requirements, thebase unit must be installed and operatedwith its antenna located 20 cm (8 inches)or more between antenna and allperson’s body (excluding extremities ofhands, wrist and feet). The handset maybe carried and operated with only theoptional specific belt-clip. Other non-tested belt-clips or similar body-wornaccessories may not comply and mustbe avoided. The product must not becollocated or operated in conjunctionwith any other antenna or transmitter.83 mm( 3 1 /4 inches )102 mm(4 inches)83 mm( 3 1 /4 inches )or102 mm(4 inches)1122TG2611C(e).book Page 20 Wednesday, January 25, 2006 4:45 PM