Panasonic KX-TG2700 Operating Instructions Manual

Also see for KX-TG2700: Installation manual Description

Contents

Voice mail service is an electronic on-line answering system offered byyour telephone company. After subscribing, the voice mail system cananswer calls automatically for you when your line is busy or if calls are notanswered, and caller can leave their messages at the voice mail boxvirtually located at the telephone company. After the voice mail box havingreceived messages, the unit will indicate it in two ways: (a) “Voice mail”displayed on the handset, and (b) “ ” on the handset and the VMindicator on the base unit will flash.To use this feature, you must first store your access number.Storing a Voice Mail Access NumberMake sure the base unit and the handset are not being used.1 Press (CONF/FUNCTION).2 Scroll to “Initial setting” by pressingÖ or Ñ, and press á.3 Scroll to “Voice mail” by pressing Ö orÑ, and press á.4 Scroll to “Save VM access#” by pressingÖ or Ñ, and press á.5 Enter your access number, up to 32 digits.•You may enter pauses* (see page 56).•Each time you press (HOLD/CLEAR), a digit iserased. To erase all digits, press and hold(HOLD/CLEAR).6 Press the right soft key ( ).•A beep sounds.•To exit the programming mode, press (OFF).•“ ” is displayed.•You can exit the programming mode any time by pressing (OFF).To erase a stored numberRepeat steps 1 through 5 and press and hold (HOLD/CLEAR) until all ofthe digits are erased. Press the right soft key ( ).SAVEMAILSAVEMAIL55Advanced OperationFor assistance, please call: 1-800-211-PANA(7262)Voice Mail ServiceSet tel lineHVoice mailSet base unitCopy directoryHInitial setting2Way radio modeVM tone detectHSave VM access#---------------S A V ESave VM access#12344567PPP890IHS A V ESave VM access#IH