Panasonic KX-TG2711 Operating Instructions Manual

Also see for KX-TG2711: Operating instructions Operating instructions

Panasonic KX-TG2711 Operating Instructions Manual Manual pdf 20 page image

Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:R Set the date and time beforehand(page 12).1 M N2 MbN: “Handset Setup” a M N3 MbN: “Alarm” a M N4 MbN: Select the desired alarm option. aM N“Off”Turns alarm off. Go to step 8.“Once”An alarm sounds once at the set time.“Daily”An alarm sounds daily at the set time.Go to step 6.5 Enter the desired date and month.6 Set the desired time. a M N7 MbN: Select the desired alarm tone. aM NR We recommend selecting a differentringer tone from the one used foroutside calls.8 M N a M NR When the alarm is set, is displayed.Note:R To stop the alarm, lift the handset andpress M N or place the handset on thebase unit or charger.R When the handset is in use, the alarm willnot sound until the handset is in standbymode.Changing the unit’s regionsetting/Resetting the base unit1 M N2 MbN: “Base Unit Setup” a M N3 MbN: “Country” a M N4 MbN: Select the desired country. aM N“Other” = countries except Czech andSlovakia“Česká republika” = Czech“Slovensko” = Slovakia5 MbN: “Yes” a M N a M NNote:R The following items will be deleted or resetto their default settings:– Base unit settings (page 19)– One touch eco mode (page 13)– Caller list– Voice mail messagesR The following items will be retained:– Date and time– Repeater modeR If you select the desired country in step 4,the following default settings will bechanged for the selected country’s defaultsettings:– Recall/flash time (page 19)– Display language (page 18)R After changing the unit’s region setting/resetting the base unit, may flash on thehandset momentarily. This is normal andthe handset can be used once stopsflashing.Increasing the range of the baseunitYou can increase the signal range of the baseunit by using a DECT repeater. Please useonly the Panasonic DECT repeater noted onpage 4. Contact your Panasonic dealer fordetails.Important:R Before registering the repeater to this baseunit, you must turn the repeater mode on.20ProgrammingTG271xFX(en-en)_0919_ver011.pdf 20 2012/09/19 15:02:00Downloaded from www.Manualslib.com manuals search engine