Panasonic KX-TG2711SA Operating Instructions Manual

Panasonic KX-TG2711SA Operating Instructions Manual Manual pdf 18 page image

Main menu Sub-menu 1 Sub-menu 2Base Unit Setup*2 First Ring*7<On>– –Dial Mode<Tone>– 11Recall/Flash*8<100 msec.>– 14Privacy Mode*1, *9<Off>– –Base Unit PIN – 29Repeater Mode<Off>– 19*1 KX-TG2713*2 If you program these settings using one of the handsets, you do not need to program thesame item using another handset. (KX-TG2713)*3 The ringer tone may continue to play for several seconds even if the caller has already hungup. You may either hear a dial tone or no one on the line when you answer the call.*4 The preset melodies in this product are used with permission of © 2011 Copyrights VisionInc.*5 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing anykeys, including confirmation tones and error tones.*6 If you subscribe to a Caller ID service and want to view the caller’s information after lifting upthe handset to answer a call, turn off this feature.*7 If you do not want the unit to ring before the caller information is received, set to “Off”.(Caller ID subscribers only)You can only remove the first ring if the unit rings two times or more by default, whichdepends on your service provider/telephone company.*8 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBXsupplier if necessary.*9 To prevent other users from joining your conversations with outside callers, turn this featureon.Special programmingAlarmAn alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset.Important:R Set the date and time beforehand(page 11).1 M N2 MbN: “Handset Setup” a M N3 MbN: “Alarm” a M N4 MbN: Select the desired alarm option. aM N“Off”Turns alarm off. Go to step 8.“Once”An alarm sounds once at the set time.18ProgrammingTG2711_13SA(en)_0927_ver001.pdf 18 2012/09/27 12:18:21