Panasonic KX-TG313SK Operating Instructions Manual

Also see for KX-TG4222N: Manual Service manual

Panasonic KX-TG313SK Operating Instructions Manual Manual pdf 14 page image

Making calls1 Lift the handset and dial the phonenumber.R To correct a digit, press MCLEARN.2 Press M N.3 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Using the speakerphone1 Dial the phone number and press MZN.R Speak alternately with the other party.2 When you finish talking, press MOFFN.Note:R For best performance, use thespeakerphone in a quiet environment.R To switch back to the receiver, press M N.Adjusting the receiver or speakervolumePress MDN or MCN repeatedly while talking.Making a call using the redial listThe last 5 phone numbers dialed are stored inthe redial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired phone number.3 M NErasing a number in the redial list1 MEN REDIAL2 MbN: Select the desired phone number.a MCLEARN3 MbN: “Yes” a MOKN4 MOFFNPause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 18).Example: If you need to dial the line accessnumber “9” when making outside calls with aPBX:1 9 a MPAUSEN2 Dial the phone number. a M NNote:R A 3.5 second pause is inserted each timeMPAUSEN is pressed.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press M N or MZNwhen the unit rings.R You can also answer the call bypressing any dial key from 0 to 9,*, or #. (Any key answer feature)2 When you finish talking, press MOFFN orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press M N. To turn this featureon, see page 20.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MDN or MCN repeatedly to select thedesired volume.n Programming the volume beforehand:1 MMENUN2 MbN: “Initial setting” a MOKN3 MbN: “Ringer settings” a MOKN4 MbN: “Ringer volume” a MOKN5 MbN: Select the desired volume.6 MOKN a MOFFN14 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls