Panasonic KX-TG4311C Operating Instructions Manual

Panasonic KX-TG4311C Operating Instructions Manual Manual pdf 32 page image

Intercom/Locator32IntercomIntercom calls can be made betweenhandsets.Note:L If you receive an outside call whiletalking on the intercom, you hear 2tones.To answer the call with the handset,press {OFF}, then press {C}.L When paging unit(s) for an intercomcall, the paged unit(s) beeps for 1minute.Making an intercom call1 {INTERCOM}2 {V}/{^}: Select the desired unit. i{Select}L To stop paging, press {OFF}.3 When you finish talking, press{OFF}.Answering an intercom call1 Press {C} to answer the page.2 When you finish talking, press{OFF}.Note:L When the ringer volume for outsidecalls is set to off (page 22), thehandset rings at a low level forintercom calls.Transferring calls,conference callsOutside calls can be transferredbetween 2 handsets. 2 handsets canhave a conference call with an outsideparty.1 During an outside call, press{INTERCOM} to put the call on hold.2 {V}/{^}: Select the desired unit. i{Transfer}3 Wait for the paged party to answer.L If the paged party does notanswer, press {C} to return tothe outside call.4 To complete the transfer:Press {OFF}.L The outside call is being routed tothe destination unit.To establish a conference call:Press {Conf}.L To leave the conference, press{OFF}. The other parties cancontinue the conversation.L To put the outside call on hold,press {HOLD}. To resume theconference, press {Conf}.Answering a transferred callPress {C} to answer the page.Note:L After the paging party disconnects,you can talk to the outside caller.Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit:{LOCATOR}L All registered handsets beep for 1minute.2 To stop paging:Base unit:Press {LOCATOR}.Handset:Press {OFF}.TG431xC_OI.book Page 32 Tuesday, January 29, 2008 2:56 PM