Panasonic KX-TG5428 Operating Instructions Manual

Contents

Caller ID Service26 For assistance, please call 1-800-211-PANA (7262).Note:L You can also press {Rcvd calls} toenter the caller list.L Calling back will not be possible if thecaller information does not include aphone number.L In some cases, you may have to edit thenumber before dialing. (For example,you may have to delete “1” and the areacode.)Displayed symbolsL If the same caller calls more than once, itwill be displayed with the number (“×2”to “×9”). Only the date and time of themost recent call will be stored.L A Q is displayed next to items whichhave already been viewed or answeredon this handset.Editing a caller’s phone numberbefore calling backYou can edit a phone number in the callerlist by removing its area code and/or thelong distance code “1”.1 Press {V} or {^} to enter the caller list.2 Press {V} or {^} repeatedly to displaythe desired item.3 Press {Edit} repeatedly until the phonenumber is shown in the desired format.Each time you press {Edit}, the phonenumber will be rearranged into one of 3patterns.1 Local phone number2 Area code – Local phone number3 1 – Area code – Local phonenumber4 To return a call, press {C} or {s}.Caller ID number auto edit featureOnce you call back an edited number (see“Editing a caller’s phone number beforecalling back”), the unit can automaticallyedit other incoming phone numbers eachtime you receive a call.For example, you can use this feature toset the unit to ignore the area code ofcallers in your area code, so that you cancall these local numbers using callerinformation without dialing the area code.To activate this feature, you must edit anitem in the caller list (see “Editing a caller’sphone number before calling back”), thencall that number. After that, calls from thatcaller’s area code will be editedautomatically.This feature can be turned on or off (page32). The default setting is ON.Example:Example:Example:321-5555555-321-55551-555-321-5555