Panasonic KX-TG5562C Operating Instructions Manual

Contents

Panasonic KX-TG5562C Operating Instructions Manual Manual pdf 35 page image

Call Display Service35announcement is heard at the ringervolume (page 28, 53).L When you receive a call while on thephone, the 2nd caller’s name will not beannounced even if you subscribe to bothCall Display and Visual Call Waitingservices.L If this feature is turned off, caller nameswill not be announced (page 59, 62).L If an outside call is received while on anintercom call between the handset andbase unit, the other handsets will ring,but the caller’s name will not beannounced.Ringer ID and light-up IDThis feature can help you identify who iscalling by using different ringers and ringerindicator colours for different callers storedin the phonebook. You can assign adifferent ringer and indicator colour to eachphonebook item. When a call is receivedfrom a caller stored in the phonebook, theringer and indicator colour are used aftercaller information is displayed.L Usually the ringer and indicator colourwill be changed from the 2nd ring.Ringer IDYou can assign a different ringer tone toeach caller in the phonebook. If you select“No Ringer ID” (default), the unit will usethe ringer tone you set on page 53 when acall is received from that caller.1 Press {C} (right soft key).2 Push the joystick up or down repeatedlyto display the desired item.3 Press {OPTION}.4 Press {1} to select “Ringer ID”.5 To select a tone or melody, scroll to“Tone & Melody”, then press{SELECT}.ORTo select a song, scroll to“Customized ring”, then press{SELECT}.6 Push the joystick up or down repeatedlyto select the desired item.7 Press {SAVE}, then press {OFF}.Note:L To erase a song, see page 55 and page57. If you erase a song assigned to acaller, the Ringer ID assignment will becancelled, and the handset ringer tone(page 53) will be used instead of thatsong.Light-up IDYou can assign a different ringer indicatorcolour to each caller in the phonebook.Select “Color1” (amber), “Color2”(blue), “Color3” (green), or“Multicolor”.If you select “No Light-upID” (default),the unit will use the ringer colour you set onpage 55 when a call is received from thatcaller.1 Press {C} (right soft key).2 Push the joystick up or down repeatedlyto display the desired item.3 Press {OPTION}.4 Press {2} to select “Light-up ID”.5 Push the joystick up or down repeatedlyto select the desired ringer indicatorcolour.6 Press {SAVE}, then press {OFF}.TG5562C_5566C(e).book Page 35 Friday, May 27, 2005 10:14 AM