Voice Mail ServiceFor assistance, please visit http://www.panasonic.com/phonehelp 53To erase the Voice Mail access number1 {MENU} (middle soft key) i{#}{3}{3}{1}2 Press and hold {CLEAR} until all digitsare erased.3 {SAVE} i {OFF}Listening to Voice MailmessagesThe unit lets you know that you have newVoice Mail messages in the followingways:– The {VM} button on the base unitflashes.– “New Voice Mail” is displayed on thehandset.– The message indicator on the handsetslowly flashes blue if the message alertfeature is turned on (page 54).1 Press {C}, then press {VM} within 15seconds.L If {VM} is not displayed, the VoiceMail access number has not beenstored. Store the number (page 52).OR{MENU} (middle soft key) i {VM}2 Follow the prerecorded instructions.3 Press {OFF} when finished.1 {VM}L If the base unit beeps 3 times, theVoice Mail access number has notbeen stored. Store the number (page52).2 Follow the prerecorded instructions.3 Press {SP-PHONE} when finished.Note for handset and base unit:L If the handset or base unit still indicatesthere are new messages even after youhave listened to all new messages, turnit off by pressing and holding {OFF} onthe handset until the handset beeps.L If your Voice Mail service uses VoiceMail tones and the message is over 3minutes long, the handset may notindicate new messages.L If your Voice Mail service uses VoiceMail tones, the tones are heard from anyphone connected to the same line. If youwant to use another phone to listen toVoice Mail messages, you have to dialyour access number manually.HandsetBase unit