Panasonic KX-TG6411NZ Operating Instructions Manual

Panasonic KX-TG6411NZ Operating Instructions Manual Manual pdf 30 page image

Answering System30L If new messages have been recorded,the base unit plays back newmessages.L If there are no new messages, thebase unit plays back all messages.Note:L When the answer on indicator on thebase unit flashes rapidly, the messagememory is full (“Memory capacity”,page 28).Operating the answeringsystem during playback*1 If pressed within the first 5 seconds ofa message, the previous message isplayed.Erasing all messagesPress {4} 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have beenrecorded, u is displayed on thehandset with the total number of newmessages.1 8 (middle soft key)2 {V}/{^}: “Answer System” iM3 {V}/{^}: Select “Play New Msg.”or “Play All Msg.”. i M4 When finished, press {ih}.Note:L To switch to the receiver, press {C}.L If “Messages Full” is shown on thedisplay, u and the total number ofnew messages are not displayed.Operating the answeringsystem8 (middle soft key) i{V}/{^}: “Answer System” i MKey Operation{^} or {V} Adjust the speakervolume{7} Repeat message *1{8} Skip message{■} Stop playback{4} Erase currently playingmessageKey Operation{^} or {V} Adjust the receiveror speaker volume(during playback){1} Repeat message(during playback) *1{2} Skip message(during playback){3} Enter the“Settings” menu{4} Play new messages{5} Play all messages{6} Play greetingmessage{7}{6} Record greetingmessage{8} Turn answeringsystem on{9} or O Stop recordingStop playback{0} Turn answeringsystem off{*}{4}*2 Erase currentlyplaying message{*}{5} Erase all messages{*}{6} Erase greetingmessage *3TG6411-6421NZ(e).book Page 30 Tuesday, March 31, 2009 1:07 PM