2 When the other party answers,speak into the microphone.R Speak alternately with the otherparty.3 When you finish talking, pressMSP-PHONEN.Note:R For best performance, use thespeakerphone in a quiet environment.R While on a call, you can switch fromthe base unit to the handset:– Press M N on the handset, thenpress MSP-PHONEN on the baseunit with the call sharing mode on(page 27).– If the handset is on the base unit,simply lift it.Adjusting the speaker volumePress MjN or MkN repeatedly whiletalking.Answering callsUsing the handsetWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press M N orM N when the unit rings.R You can also answer the call bypressing any dial key from 0 to9, *, or #. (Any key answerfeature)2 When you finish talking, pressMOFFN or place the handset on thebase unit or charger.Auto talkYou can answer calls simply by liftingthe handset off the base unit or charger.You do not need to press M N. To turnthis feature on, see page 26.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MjN or MkN repeatedly toselect the desired volume.n Programming the volumebeforehand:1 MMENUN#1602 MbN: Select the desired volume.3 MSAVEN a MOFFNTemporary handset ringer offWhile the handset is ringing for a call,you can turn the ringer off temporarily bypressing M N.Using the base unitWhen a call is being received, theSP-PHONE indicator flashes rapidly.1 Press MSP-PHONEN when the unitrings.2 Speak into the microphone.3 When you finish talking, pressMSP-PHONEN.Adjusting the base unit ringer volumePress MjN or MkN repeatedly to selectthe desired volume.R To turn the ringer off, press and holdMkN until the unit beeps.Note:R Even when the ringer volume is set tooff, the base unit still rings forintercom calls (page 43).16 For assistance, please visit http://www.panasonic.com/helpMaking/Answering Calls