Programming23Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333Programmable settingsYou can customise the unit by programming the following features using the handset.To access the features, there are 2 methods.■ Scrolling through the display menus1 82 Press {V} or {^} to select the desired main menu. s M3 Press {V} or {^} to select the desired item from the next sub-menus. s M4 Press {V} or {^} to select the desired setting. s ML This step may vary depending on the feature being programmed.L To exit the operation, press {ic}.■ Using the direct command code1 8 s Enter the desired code.Example: Press 8(1)1.2 Select the desired setting. s ML This step may vary depending on the feature being programmed.L To exit the operation, press {ic}.Note:L In the following table, < > indicates the default settings.L In the following table, + indicates the reference page number.L Display menu order and sub-menu may vary depending on your model.Display the menu tree and direct command code tableMain menu: \ “Caller List”Main menu: e “Answer System”*1Operation Code +Viewing the caller list. #213 30Sub-menu 1 Sub-menu 2 Settings Code +Play New Msg.(Msg.: message)– – #323 34Play All Msg. – – #324 34Erase All Msg.*2 – – #325 34Greeting Start REC*2(Record greeting)– #302 33Play Greeting – #303 33Default*2(Reset to pre-recordedgreeting)– #304 33TG6611-6621E(e).book Page 23 Tuesday, December 7, 2010 2:00 PM