Message indicatorM N (Answer on)DisplayHandset display itemsItem MeaningRange status: The more barsvisible, the closer the handsetis to the base unit.Out of base unit rangePaging, intercom modeZ Speakerphone is on.(page 17)The line is in use.R When flashing slowly: Thecall is put on hold.R When flashing rapidly: Anincoming call is now beingreceived.Missed call*1 (page 34)The base unit transmissionpower is set to “Low”.(page 16)Noise reduction is set.(page 18)The LCD and key backlight isoff. (page 27)R When displayed next to thebattery icon: Answeringsystem is on. (page 36)R When displayed with anumber:New messages have beenrecorded. (page 38)“Greeting Only” isselected as the caller’srecording time. In this case,the answering systemanswers calls with a greetingmessage and callermessages are not recorded.(page 42)Item MeaningBattery levelAlarm is on. (page 29)Equalizer is set. (page 19)Privacy mode is on.(page 27)Ringer volume is off.(page 18)Night mode is on. (page 30)Blocked call*1 (page 30,35)New voice mail messagereceived.*2 (page 43)Line inuseSomeone is using the line.IN USE Answering system is beingused by another handset orthe base unit.*1 Caller ID subscribers only*2 Voice mail subscribers onlyBase unit display itemsItem Meaning- - “Greeting Only” isselected as the caller’srecording time. In this case,the answering systemanswers calls with a greetingmessage and callermessages are not recorded.(page 42)Handset soft key iconsIcon ActionReturns to the previous screen oroutside call.Displays the menu.OK Accepts the current selection.Makes a call. (page 17)Temporarily turns off the ringerfor incoming calls. (page 18)13Getting Started