Preparation13Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333Panasonic Ni-MH batteryperformance (supplied batteries)Note:L It is normal for batteries not to reachfull capacity at the initial charge.Maximum battery performance isreached after a few complete cycles ofcharge/discharge (use).L Actual battery performance dependson a combination of how often thehandset is in use and how often it isnot in use (standby).L Even after the handset is fullycharged, the handset can be left onthe base unit or charger without any illeffect on the batteries.L The battery level may not bedisplayed correctly after you replacethe batteries. In this case, place thehandset on the base unit or chargerand let it charge for at least 7 hours.Turning the poweron/offPower onPress {ih} for about 1 second.Power offPress {ih} for about 2 seconds.Setting up the unitbefore useDisplay language1 {ih} i {j/OK}2 Press {^} or {V} to select“Handset Setup”. i {>}3 Press {^} or {V} to select“Display Setup”. i {>}4 Press {^} or {V} to select“Select Language”. i {>}5 Press {^} or {V} to select thedesired language. i {>} i{ih}Note:L If you select a language you cannotread: {ih} i {j/OK} i {^} 3times i {>} i {V} 2 times i{>} 2 times i {^}/{V}: Select thedesired language. i {>} i{ih}Date and time1 {j/OK}2 Press {^} or {V} to select“Handset Setup”. i {>}3 Proceed with the operation for yourmodel.■ KX-TG7200/KX-TG7202/KX-TG7203Press {^} or {V} to select“Set Date & Time”. i {>}■ KX-TG7220/KX-TG7222/KX-TG7223/KX-TG7224Press {^} or {V} to select“Time Settings”. i {>} iPress {^} or {V} to select“Set Date & Time”. i {>}Operation OperatingtimeIn continuous use 17 hours max.In continuousstandby mode180 hoursmax.TG7200-7220E(e).book Page 13 Tuesday, May 22, 2007 9:34 AM