Panasonic KX-TG7301NZ Operating Instructions Manual

Also see for KX-TG7301NZ: Operating instructions

Answering System352 {V}/{^}: “Answer System” iM3 {V}/{^}: “Settings” i M4 {V}/{^}: “Number of Rings” iM5 {V}/{^}: Select the desired setting.i M i {ih}For Telecom Call Minder orTelstraClear Message Mailbox servicesubscribersTo receive Call Minder or MessageMailbox messages and use the unit’sanswering system properly, please notethe following:L “Call Minder” and “Message Mailbox”are services provided by your serviceprovider/telephone company (page37). You will need to first subscribe oractivate this service through yourservice provider/telephone company.Contact your service provider/telephone company on how to operatethis service and how you will benotified that you have messages. Touse this service you will be required toleave your answering machine off onyour unit (page 30). This will allow theservice to receive any messages. Thisunit has a visual indicator (0) toindicate new messages. Your serviceprovider/telephone company alsouses a “Stutter” dial tone to indicatenew messages.L To use the unit’s answering machinerather than the service provided byyour service provider/telephonecompany, please contact your serviceprovider/telephone company to have itremoved or deactivated permanentlyor temporarily. Alternatively you canleave this service connected andchange the “Number of Rings” to ashorter duration on your unit so yourunit’s answering machine can pick upthe call prior to the service provided byyour service provider/telephonecompany.Note:L This service can capture messageswhile the user is on a dial-up Internetconnection.Caller’s recording timeYou can change the maximum messagerecording time allotted to each caller.You can also select “Greeting Only”which sets the unit to greet callers butnot record messages. The defaultsetting is “3 Minutes”.1 K (middle soft key)2 {V}/{^}: “Answer System” iM3 {V}/{^}: “Settings” i M4 {V}/{^}: “Recording Time” iM5 {V}/{^}: Select the desired setting.i M i {ih}Note:L You may create your own greeting-only message by following the stepson page 31.The unit plays the pre-recordedgreeting-only message asking callersto call again if your own greeting-onlymessage is not recorded.Call screeningYou can set the call screening feature“On” or “Off”. For details, see page 30.The default setting is “On”.1 K (middle soft key)2 {V}/{^}: “Answer System” iM3 {V}/{^}: “Settings” i M4 {V}/{^}: “Call Screening” iM