Panasonic KX-TG7341NZ Operating Instructions Manual

Making/Answering Calls171 {0} i l2 Dial the phone number. i {C}1 {s}2 {0} i {P}3 Dial the phone number.Note for handset and base unit:L A 3 second pause is inserted eachtime l on the handset or {P} on thebase unit is pressed. Repeat asneeded to create longer pauses.Answering callsUsing the handsetWhen a call is being received, the ringerindicator on the handset flashes.1 Lift the handset and press {C} or{s} when the unit rings.L You can also answer the call bypressing any dial key from {0} to{9}, {*}, or {#}. (Any keyanswer feature)2 When you finish talking, press{ih} or place the handset on thebase unit or charger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. Youdo not need to press {C}. To turn thisfeature on, see page 23.Adjusting the handset ringer volumePress {^} or {V} repeatedly to select thedesired volume while the handset isringing for an incoming call.Note:L You can also program the handsetringer volume beforehand (page 23).Using the base unitWhen a call is being received, the in useindicator flashes rapidly.1 Press {s} when the unit rings.2 Speak into the microphone.3 When you finish talking, press {s}.Adjusting the base unit ringer volumePress {^} or {V} repeatedly to select thedesired volume.L To turn the ringer off, press and hold{V} until the unit beeps.Changing the base unit ringer tonesYou can change the ringer tone used bythe base unit.1 Press {^} or {V} when the base unitis in standby mode.2 Press {7} or {8} repeatedly toselect the desired ringer tone.i{■}Note:L You can also select the desired toneby pressing a dial key ({1} – {6}) instep 2.HandsetBase unit