Voice Mail Service37For assistance, please visit http://www.panasonic.com/helpTurning VM tone detection on/offThe default setting is “On”.1 {MENU} (center of joystick) i{#}{3}{3}{2}2 {V}/{^}: Select the desired setting.i {SAVE} i {OFF}Listening to voice mailmessagesThe unit lets you know that you havenew voice mail messages in thefollowing ways:– “New Voice Mail” is displayed onthe handset if message indicationservice is available.– The message indicator on the handsetflashes slowly if message alert featureis turned on (“Message alert”, page35).1 Press {C}, then press {VM} within15 seconds.OR{MENU} (center of joystick) i{#}{3}{3}{0}L The speakerphone turns on.2 Follow the pre-recordedinstructions.3 When finished, press {OFF}.Note:L If {VM} is not displayed, the voice mailaccess number has not been stored.Store the number (page 36).L If the handset still indicates there arenew messages even after you havelistened to all new messages, turn itoff by pressing and holding {OFF}until the handset beeps.L If your voice mail service uses voicemail tones and a message is over 3minutes long, the handset may notindicate new messages.L If your voice mail service uses voicemail tones, the tones are heard fromany phone connected to the sameline. If you want to use another phoneto listen to voice mail messages, youhave to dial your access numbermanually.