Panasonic KX-TG7731 Quick Manual

Also see for KX-TG254SK: Operating instructions Quick guide Operating instructions

Contents

Panasonic KX-TG7731 Quick Manual Manual pdf 3 page image

– 3 –Link to cellYou can use the unit to make or answer calls using a cellular line. Your cellular phones must haveBluetooth® wireless technology that is compatible with this product. For more details, please visitour Web site: http://www.panasonic.com/link2cellL Locate your cellular phone near the base unit. If the cellular phone is too close to the base unitduring a cellular call, you may hear noise. For best performance, we recommend placing thecellular phone between 0.6 m to 3 m (2 feet to 10 feet) away from the base unit.Registering a Bluetooth cellular phone1 Handset:For CELL 1: {MENU} (6241For CELL 2: {MENU} (6242L After the CELL 1 or CELL 2 indicator on the base unit starts flashing red, the rest of theprocedure must be completed within 5 minutes.2 Your cellular phone:While the CELL 1 or CELL 2 indicator is flashing red, follow the instructions of your cellularphone to enter the registration mode.L Depending on your cellular phone, it may ask you to enter the base unit PIN (default:“0000”).3 Handset:Wait until a long beep sounds.L It may take more than 10 seconds to complete registration.L When the CELL 1 or CELL 2 indicator lights green, the cellular phone is connected to thebase unit. You are ready to make cellular calls.4 To select which unit receives calls for the cellular line (default: “All”):{OK} s {r}: Select the desired handset or “All”. s {SAVE}L If not required, go to step 5.5 {OFF}Note:L Make sure that your cellular phone is set to connect to this product automatically. Refer to yourcellular phone’s operating instructions.TrademarksL The Bluetooth ® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of suchmarks by Panasonic Corporation is under license. All other trademarks identified herein arethe property of their respective owners.Cell lineCell phoneservice providersTG77xx_(en)_QG.fm Page 3 Wednesday, December 12, 2012 10:44 AM