Panasonic KX-TG7851TU Operating Instructions Manual

Changing the handset nameEach handset can be given a customisedname (“Bob”, “Kitchen”, etc.). This is usefulwhen you make intercom calls betweenhandsets. You can also select whether or notthe handset name is displayed in standbymode. The default setting is “No”. If you select“Yes” without entering any handset name,“Handset 1” to “Handset 6” is displayed.1 M N (right soft key) #1042 Enter the desired name (max. 10characters; page 33).R If not required, go to step 3.3 MOKN4 MbN: Select the desired setting. a MOKN2 times5 MeNIncoming call barring (Caller IDsubscribers only)This feature allows the unit to reject calls fromspecified phone numbers that you do not wantto answer such as junk calls.When a call is received, the unit does not ringwhile the caller is being identified. If the phonenumber matches an entry in the call barredlist, the unit emits no sound to the caller, anddisconnects the call.Important:R When the unit receives a call from anumber that is stored in the call barred list,the call is logged in the caller list(page 29) with after the call isdisconnected.Storing unwanted callersYou can store up to 30 phone numbers in thecall barred list.Important:R You must store the phone number with anarea code in the call barred list.n From the caller list:1 MCN ( )2 MbN: Select the entry to be barred. aM N a M N3 MbN: “Save CID” a MOKN4 MbN: “Caller Barred” a MOKN5 MbN: “Yes” a MOKN a MeNn By entering phone numbers:1 M N (right soft key) #217 aM N2 Enter the phone number (24 digitsmax.). a MOKNR To erase a digit, press MCN.3 MeNViewing/editing/erasing bar callnumbers1 M N (right soft key) #2172 MbN: Select the desired entry.R To exit, press MeN.3 To edit a number:M N a Edit the phone number. aMOKN a MeNTo erase a number:M N a MbN: “Yes” a MOKN a MeNNote:R When editing, press the desired dial key toadd, MCN to erase.Setting call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign up to6 phone numbers to be restricted, and selectwhich handsets are to be restricted. Storingarea codes here prevents the restrictedhandsets from dialling any phone number inthat area code.1 M N (right soft key) #2562 Enter the base unit PIN (default: “0000”).R If you forget your PIN, contact anauthorised service centre.3 Select the handsets to be restricted bypressing 1 to 6.R All handsets registered to the base unitare displayed.26ProgrammingTG7851TU(en-en)_0718_ver011.pdf 26 2013/07/18 12:00:00