Panasonic KX-TG7861AL Operating Instructions Manual

Panasonic KX-TG7861AL Operating Instructions Manual Manual pdf 14 page image

Date and timeImportant:R When you install the batteries for the firsttime, the handset may prompt you to setdate and time. First press MOKN, thenproceed to step 2.1 M N (right soft key) #1012 Enter the current date, month, and year.a MOKNExample: 15 July, 201315 07 13R You can select the date format bypressing #:– dd/mm/yy (date/month/year)– yy/mm/dd3 Enter the current hour and minute.Example: 9:3009 30R You can select 24-hour or 12-hourclock format (“AM” or “PM”) bypressing *.4 MOKN a MeNNote:R The date and time may be incorrect after apower failure. In this case, set the date andtime again.One touch eco modeThe MR/ECON button on the handset enablesyou to activate the eco function with onetouch.By activating eco mode, your unit can reducethe base unit transmission power by up to90 % in standby mode.You can turn on/off one touch eco mode byjust pressing MR/ECON. The default setting is“Normal”.– When the one touch eco mode is on: “Low”is temporarily displayed and is shownon the handset display instead of .– When the one touch eco mode is off:“Normal” is temporarily displayed andgoes off from the handset display.Note:R When there is another cordless phonenearby and it is in use, the base unittransmission power may not be reduced.R Activating one touch eco mode reduces therange of the base unit in standby mode.R If you set the repeater mode to “On” (page30):– One touch eco mode is cancelled.– “Eco Setup” is not shown in thedisplay menu (page 24).Display modeYou can select to display either a single itemor multiple items on one screen at a time forthe following features:– handset main menu icons in function menu– menu list, recorded message list,phonebook list, caller list, and redial listSelect the desired setting:– “Multi Items”: Multiple entries/all menuicons are shown on one screen at a time.– “Single Item”: An entry/a menu icon isshown on one screen at a time.The default setting is “Multi Items”.Programming the display modebeforehand1 M N (right soft key) #1922 MbN: Select the desired setting. a MOKNa MeNNote:R When in multiple items display mode, youcan move screens by pressing MEN or MFN,without scrolling down or up through the list:– Press MEN to go to the next screen.– Press MFN to return to the previousscreen.R When in multiple items display mode, youcan switch the screen to confirm thedetailed information by pressing M N.14Getting StartedTG786xAL(en)_0111_ver002.pdf 14 2013/01/11 11:36:21