Panasonic KX-TG8022E Operating Instructions Manual

Also see for KX-TG8021E: Quick guide Quick guide

Programming30 Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 83335 Handset:Wait until “Enter Base PIN” isdisplayed. i Enter the base unitPIN (default: “0000”). i ML If you forget your PIN, see page47.L When the handset has beenregistered successfully, w stopsflashing.Note:L When you purchase an additionalhandset, refer to the additionalhandset’s installation manual forregistration.Selecting a base unitWhen “Auto” is selected, the handsetautomatically uses any available baseunit it is registered to. When a specificbase unit is selected, the handset makesand receives calls using that base unitonly. If the handset is out of range of thatbase unit, no calls can be made.1 K (middle soft key) i N iM2 {V}/{^}: “Select Base” i M3 {V}/{^}: Select the desired baseunit number, or “Auto”. i ML The handset starts searching forthe base unit.Deregistering a handsetA handset can cancel its ownregistration (or the registration ofanother handset) that is stored in thebase unit. This allows the handset to endits wireless connection with the system.1 K (middle soft key) i < iM2 {3}{3}{5}3 {V}/{^}: “Deregistration” iML The numbers of all handsetsregistered to the base unit aredisplayed.4 Select the handset(s) you want tocancel by pressing the desiredhandset number. i ML The selected handset number(s)flashes.L To cancel a selected handsetnumber, press the number again.The number stops flashing.5 {V}/{^}: “Yes” i ML A confirmation tone sounds aseach handset numberdisappears.L The handset does not beep whencancelling its own registration.6 {ih}Cancelling a base unitA handset can cancel a base unit that itis registered to. This allows the base unitto end its wireless connection with thesystem.1 K (middle soft key) i N iM2 {V}/{^}: “Registration” iM3 {3}{3}{5}4 {V}/{^}: “Cancel Base” i M5 Select the base unit(s) you want tocancel by pressing the desired baseunit number. i ML The selected base unit number(s)flashes.L To cancel a selected base unitnumber, press the number again.The number stops flashing.6 {V}/{^}: “Yes” i M i {ih}Note:L To register a handset to another baseunit or to the same base unit again,see page 29.TG8021E(e).book Page 30 Friday, June 13, 2008 1:19 PM