Panasonic KX-TG8051E Operating Instructions Manual

Programming30 Helpline Tel. No.: U.K. 0844 844 3898 Ireland 01289 83333 To edit a number:~ s Edit the phone number. s Ms {ic}To erase a number:W s {r}: “Yes” s M s {ic}Note:L When editing, press the desired dial key toadd, ^ to erase.Setting call restrictionYou can restrict selected handsets fromdialling certain numbers. You can assign up to6 phone numbers to be restricted, and selectwhich handsets are to be restricted. Storingarea codes here prevents the restrictedhandsets from dialling any phone number inthat area code.1 1 (middle soft key) (2562 Enter the base unit PIN (default: “0000”).L If you forget your PIN, see page 45.3 {r}: Select the handsets to be restricted.s tL All handsets registered to the base unitare displayed.L “Q” is displayed next to the selectedhandset numbers.L To cancel a selected handset, presst again. “Q” disappears.4 M5 {r}: Select a memory location. s M6 Enter the phone number or area code tobe restricted (8 digits max.). s M s{ic}L To erase a restricted number, press^.Note:L You can also select a memory location instep 5 as follows:Press 1 to 6. s MChanging the base unit PIN(Personal Identification Number)Important:L If you change the PIN, please make note ofyour new PIN. The unit will not reveal thePIN to you. If you forget your PIN, see page45.1 1 (middle soft key) (1322 Enter the current 4-digit base unit PIN(default: “0000”).3 Enter the new 4-digit base unit PIN. sM s {ic}Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered to the baseunit.Important:L The additional handset modelrecommended for use with this unit is notedon page 5. If another handset model isused, certain operations (handset settings,base unit settings, etc.) may not beavailable.Registering a handset to the baseunitThe supplied handset and base unit are pre-registered. If for some reason the handset isnot registered to the base unit (for example, _is displayed even when the handset is near thebase unit), re-register the handset.1 Handset:1 (middle soft key) (13)2 Base unit:Proceed with the operation for yourmodel.■ KX-TG8051Press and hold {x} for about 5seconds. (No registration tone)■ KX-TG8061/KX-TG8062/KX-TG8063Press and hold {x} for about 5seconds, until the registration tonesounds.L If all registered handsets start ringing,press {x} again to stop, then repeatthis step.TG8051_8061E(e).book Page 30 Monday, January 24, 2011 4:37 PM