Panasonic KX-TG8070FX Operating Instructions Manual

h Base Unit Settings18Base unit settingsTo customise the base unit:1 {MENU} (right soft key)2 Select h by pressing {^}, {V}, {<}, or {>}. i {OK}3 Enter the base unit PIN (Personal Identification Number; default: “0000”). i {OK}4 Press {^} or {V} to select the desired item in the base unit settings menu. i {OK}5 Press {^} or {V} to select the desired item in the sub-menu. i {OK}6 Press {^} or {V} to select the desired setting then press {OK}.L This step may vary depending on the feature being programmed.L To exit the operation, press {i}.Note:L Use the handset to customise the base unit.L The selected item is highlighted on the display. The currently activated setting is indicated by “t”located on the left of the item on the display.*1 Change the recall time, if necessary, depending on the requirements of your serviceprovider/telephone company or PBX. When using the unit in Czech/Slovakia, select “100 msec.” asthe recall time.*2 If you store the PBX access number, a pause will be added automatically between the PBX accessnumber and the first digit of the phone number when you make calls.*3 If you change the PIN, please make note of your new PIN. The unit will not reveal the PIN to you.*4 If you forget your PIN, consult your nearest Panasonic service centre.Menu Sub-menu Details (default setting)Ringer Setup Ringer Volume For base unit (“Volume 3”)Ringtone (“Ringtone 1”)Call Options Dial Mode (“Tone”): page 12Recall/Flash Recall time (“600 msec.”)*1PBX Access No. Enter the 1-digit code. i {OK}*2Base Unit PIN — Change base unit PIN (“0000”). *3– Enter the new 4-digit base unit PIN. *4 i{OK}– Enter the new 4-digit base unit PIN again.i {OK}TG8070-8090FX(e-e).book Page 18 Wednesday, August 1, 2007 9:26 AM