Panasonic KX-TG8202C Operating Instructions Manual

Panasonic KX-TG8202C Operating Instructions Manual Manual pdf 17 page image

Making/Answering Calls17Making calls1 Dial the phone number.L To correct a digit, press {CLEAR}.2 Press {C}.3 When you finish talking, press {OFF}or place the handset on the base unitor charger.Using the speakerphone1 Dial the phone number, and press{s}.L Speak alternately with the otherparty.2 When you finish talking, press{OFF}.Note:L For best performance, use thespeakerphone in a quiet environment.L To switch back to the receiver, press{C}.Adjusting the receiver/speakervolumePush the joystick up or down repeatedlywhile talking.Making a call using the rediallistThe last 5 phone numbers dialed arestored in the redial list (each 48 digitsmax.).1 {REDIAL} (right soft key)2 {V}/{^}: Select the desired phonenumber.3 {C}Erasing a number in the redial list1 {REDIAL} (right soft key)2 {V}/{^}: Select the desired phonenumber.3 {ERASE}4 {V}/{^}: “Yes” i {SELECT} i{OFF}Note:L Step 3 variation:{MENU} i {V}/{^}: “Erase” i{SELECT}Erasing all numbers in the redial list1 {REDIAL} (right soft key)2 {MENU} i {V}/{^}: “Erase all”i {SELECT}3 {V}/{^}: “Yes” i {SELECT}PAUSE button (for PBX/longdistance service users)A pause is sometimes required whenmaking calls using a PBX or longdistance service. When storing a callingcard access number and/or PIN in thephonebook, a pause is also needed(page 22).For example, if you need to dial the lineaccess number “9” when makingoutside calls with a PBX:1 {9} i {PAUSE} i Dial thephone number.2 {C}Note:L A 3.5 second pause is inserted eachtime {PAUSE} is pressed. Pressrepeatedly to insert longer pauses.TG8202C_TG8231C_8232C(e).book Page 17 Friday, July 27, 2007 4:48 PM