Panasonic KX-TG8412C Operating Instructions Manual

Programming25■ Erasing a number:{ERASE} i {V}/{^}: “Yes”i {SELECT} i {OFF}Note:L When editing, press the desired dialkey to add, {CLEAR} to erase.L When viewing, {w/o NUM} appears ifthe block calls without phone numberfeature is turned on. To turn thefeature off: {w/o NUM} i {V} i{SAVE} i {OFF}Display modeYou can select to display either a singleitem or multiple items on one screen at atime for the following features:– menu list, phonebook list, caller list,redial list, and call block list– handset top menu icons in functionmenuSelect the desired setting:– “Multi items”: Multiple entries/allmenu icons are shown on one screenat a time.– “Single item”: An entry/a menuicon is shown on one screen in largecharacters at a time.The default setting is “Multi items”.1 {MENU} (centre of joystick) i{#}{1}{9}{2}2 {V}/{^}: Select the desired setting.i {SAVE}3 {OFF}Note:L When {MULTI} or {SINGLE} isdisplayed as a right soft key on thehandset, you can temporarily switchthe display mode by pressing{MULTI} or {SINGLE} (page 11).L When {MULTI} or “Multi items” isselected as the display mode, you canmove screens by pushing the joystickright or left, without scrolling down orup through the list:– Push the joystick right to go to thenext screen.– Push the joystick left to return to theprevious screen.Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered tothe base unit.Important:L See page 4 for information on theavailable model.Registering a handset to abase unitThe supplied handset and base unit arepre-registered. If for some reason thehandset is not registered to the baseunit, re-register the handset.1 Handset:{MENU} (centre of joystick) i{#}{1}{3}{0}2 Base unit:Press and hold {LOCATOR} forabout 4 seconds. (No registrationtone)L If all registered handsets startringing, press the same button tostop. Then repeat this step.L The next step must be completedwithin 90 seconds.Available for:KX-TGA840C/KX-TGA740C handsetTG8412C(e).book Page 25 Tuesday, February 3, 2009 1:41 PM