Making/Answering CallsFor assistance, please visit http://www.panasonic.com/helpAnswering callsUsing the base unit :When a call is being received, the LINE1 indicatorand/or LINE2 indicator on the base unit flashesrapidly.1 Lift the corded handset or press {SP-PHONE}when the unit rings.L The called line is automatically selected. Tochange the line selection mode, see page17.L You can also answer the call by pressing{LINE 1} or {LINE 2}.2 When you finish talking, place the cordedhandset on the cradle. When thespeakerphone is used, press {SP-PHONE}.Adjusting the base unit ringer volumePress {^} or {V} repeatedly to select the desiredvolume while the base unit is ringing for anincoming call.Note:L You can also program the base unit ringervolume beforehand (page 29).Temporary base unit ringer offWhile the base unit is ringing for a call, you canturn the ringer off temporarily by pressing {~}.Using the handset YWhen a call is being received, the ringer indicatorand c and/or d flashes rapidly.1 Lift the handset and press {C} or {s} whenthe unit rings.L The called line is automatically selected. Tochange the line selection mode, see page17.L You can also answer the call by pressing{LINE 1} or {LINE 2}.L You can also answer the call by pressingany dial key from {0} to {9}, {*}, or {#}.(Any key answer feature)2 When you finish talking, press {OFF} or placethe handset on the charger.Auto talkYou can answer calls simply by lifting the handsetoff the charger. You do not need to press {C}. Toturn this feature on, see page 28.Adjusting the handset ringer volumePress {^} or {V} repeatedly to select the desiredvolume while the handset is ringing for anincoming call.Note:L You can also program the handset ringervolume beforehand (page 29).Temporary handset ringer offWhile the handset is ringing for a call, you can turnthe ringer off temporarily by pressing {OFF}.TG939x(e).book Page 19 Friday, January 29, 2010 2:41 PM