Panasonic KX-TGA271B Installation Manual

Also see for KX-TGA271B: Operating instructions Installation manual

Contents

– 2 –• Clean the charge contacts of the handset and the charger with a soft, dry clothonce a month. Clean more often if the unit is subject to grease, dust or highhumidity. Otherwise the battery may not charge properly.Handset battery informationAfter your Panasonic battery is fully charged:Charging the batteryPlace the handset on the charger and charge forabout 15 hours before initial use.• The CHARGE indicator lights, a beep sounds and“Charging” will be displayed.• Recharge the battery when:– “Recharge battery” is displayed,– “ ” flashes on the display, or– the handset beeps intermittently while it is in use.• If the battery has been discharged, the handset willdisplay “Charge for 15HRS” and “ ” when youplace the handset on the charger. The handset will notwork. Keep charging.Theon th12•The•YouReThisKX-TTheOnlyMakReg•TheBelt Clip!You can hang the handset on your belt or pocket using the belt clip.To attach the belt clip To remove the belt clipWhile pressing the top of the clip (A),pull the right edge in the direction of thearrow (B).CHARGEIndicatorCharge ContactsOperation Operating timeWhile in use (TALK)While not in use (Standby)While using the Reception Booster featureUp to 3.5 hoursUp to 7 daysUp to 2.7 hoursWhen using the 2-Way Radio mode with the battery fully charged:Operation Operating timeWhile in use (TALK)While not in use (Standby)Up to 3.5 hoursUp to 9 hoursA BToKXIns