Panasonic KX-TGA405 Installation Manual

Also see for KX-TGA405: Installation guide Installation guide

Contents

_ 3 _Wall MountingDrive the screws (not supplied) into the wall. Mount the unit, then slide it down.37.0 mm(1 15 /32 inches)Screws2 Confirm that the STATUS indicator and q indicator light green. (The unit isready for use.)L If the indicators do not light green, re-position the unit in a place where theindicators light green.21 Connect the unit.L Use only the supplied Panasonic AC adaptor PQLV219.L When the unit is turned on, the STATUS indicator and q indicator light amberfor about 2 seconds.Press plug firmly.(120 V AC, 60 Hz)Hook23Note:L The AC adaptor must remain connected at all times. (It is normal for the adaptor tofeel warm during use.)L The unit can support a maximum of 2 handsets at a time.SpecificationsN Standard: DECT 6.0 (Digital Enhanced Cordless Telecommunications 6.0)N Frequency range: 1.92 GHz to 1.93 GHzN RF transmission power: 115 mW (max.)N Power source: 120 V AC, 60 HzN Power consumption: Standby: Approx. 0.0 W, Maximum: Approx. 0.0 WLTo stop the registration tone, press [LOCATOR] on the base unit.1.0 W, 1.8 W