Panasonic KX-TGA572S Operating Instructions Manual

Making/Answering Calls16 For assistance, please visit http://www.panasonic.com/phonehelpMaking calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {CLEAR}.2 Press {C} or {CALL}.3 When you finish talking, press {OFF} orplace the handset on the charger.Using the speakerphone1 Lift the handset, dial the phone number,and press {s}.L Speak alternately with the other party.2 When you finish talking, press {OFF}.Note:L Use the speakerphone in a quietenvironment.L To switch to the receiver, press {C}.Adjusting the receiver/speaker volumeThere are 6 levels.Press {^} or {V} repeatedly while talking.Note:L If you adjust the receiver volume to level5 or 6 during a conversation, it willautomatically change to level 4 after youhang up or switch to speakerphone.Making a call using the redial listThe last 10 phone numbers dialed arestored in the redial list.1 {REDIAL}2 Press {^} or {V} to select the desirednumber.3 {C}Note:L The caller’s name is not stored in theredial list when calling back from thecaller list.Erasing a number in the redial list1 {REDIAL}2 Press {^} or {V} to select the desirednumber. i {ERASE}3 “Yes” i {SELECT} i {OFF}PAUSE button (for PBX/long distanceservice users)A pause is sometimes required whenmaking calls using a PBX or long distanceservice. When storing a calling cardaccess number and/or PIN in thephonebook, a pause is also needed (page23).For example, if you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 {9} i {PAUSE} i Dial the phonenumber.2 {C}Note:L A 3.5 second pause is inserted eachtime {PAUSE} is pressed. Pressrepeatedly to insert longer pauses.