Panasonic KX-TGA641FX Installation Manual

Contents

5Battery installation/Battery chargeImportant:• Use the supplied rechargeable batteries. For replacement, we recommendusing the Panasonic rechargeable batteries noted in the base unit’s operatinginstructions.• Wipe the battery ends (S, T) with a dry cloth.• Avoid touching the battery ends (S, T) or the unit contacts.• Confirm correct polarities (S, T).• USE ONLY Ni-MH batteries AAA (R03) size.• Do NOT use Alkaline/Manganese/Ni-Cd batteries.Place the handset on the charger for about 7 hours before initial use.Note:• The handset display may show “Please wait for 1 minute.” when thehandset is placed on the charger if it is not registered to the base unit.• If the batteries are fully charged, but the operating time seems to be shorter,clean the battery ends (S, T) and the charge contacts with a dry cloth andcharge again.Display language16 display languages are available.If you select a language you cannot read:1 {ih} i 82 Proceed with the operation for your model.N KX-TG6411{^} 3 times i MN KX-TG6421/KX-TG6451/KX-TG6461{^} 4 times i M3 {V} 2 times i M 2 times i {V}/{^}: Select your desired language. iM i {ih}When the language selection is displayed after installing the batteries for thefirst time, you can select your desired language.{V}/{^}: Select your desired language. i M i {ih}You can select “ ”, “ ”, “ ”, “ ”,“ ”, “ ”, “ ”, “ ”, “ ”,“ ”, “ ”, “ ”, “ ”, “ ”,“ ”, or “ ”.TGA641FX(fx).book Page 5 Friday, February 27, 2009 9:17 AM