Panasonic KX-TGA711FX Installation Manual

Contents

8Registering the handset to the KX-TG7100/KX-TG7120base unitEnsure that the handset is switched on. If it is not on, press and hold {ih}for few seconds to turn the handset on.1 Lift the handset and press {ih} to put the handset in standby mode.2 Press and hold {x} on the base unit for about 3 seconds, until theregistration tone sounds.3 Place the handset on the base unit. The registration tone continues tosound. With the handset still on the base unit, wait until a confirmationtone sounds and w stops flashing.Note:• If an error tone sounds, or if w is still flashing, register the handsetmanually. (See manual registration in the KX-TG7100/KX-TG7120operating instructions.)• If all registered handsets start ringing in step 2, press {x} to stop. Startagain from step 1.• Charge the batteries for about 7 hours before initial use.• The KX-TG7100 does not feature an answering system.• Answering system features are available only when this handset isregistered to the KX-TG7120.TGA711FX(EX).book Page 8 Wednesday, April 19, 2006 5:05 PM