Panasonic KX-TGA715E Operating Instructions Manual

18 Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333Handset/Base Unit SettingsBase unit settings*1 Change the recall time, if necessary, depending on the requirements of your serviceprovider/telephone company or PBX.*2 If you change the PIN, please make note of your new PIN. The unit will not reveal the PINto you. If you forget your PIN, consult your nearest Panasonic service centre.Time settingsAlarmAn alarm will sound for 3 minutes at the set time once or daily. Set the date and timebeforehand (page 16).1 {j/OK} i “Handset Setup” i {>}2 “Time Settings” i {>}3 “Alarm” i Press {>} 2 times.4 Select an alarm mode. i {>}5 Enter the desired hour and minute. i {j/OK}6 Select the desired ringtone. i {>}7 “Save” i {>} i {ih}Note:L To stop the alarm, press any dial key.L When in talk or intercom mode, the alarm will not sound until the call has ended.L If you select “Once”, the setting will change to “Off” after the alarm sounds.Base unitsettings menuSub-menu Feature (default setting)Ringer Volume — Base unit ringer volume (Medium)Call Options Recall/Flash Change the recall time (“100 msec.”). *1Other Options Base Unit PIN Change base unit PIN (“0000”).*2– Enter the current 4-digit base unit PIN.i Enter the new 4-digit base unit PIN.i {j/OK}Repeater Mode (“Off”)Off Turns alarm off. Press {>} again, then press {ih} to finish.Once The alarm sounds once at the set time. Enter the desired day and month.Daily An alarm sounds daily at the set time.TGA715E_717E(e-e).book Page 18 Wednesday, August 2, 2006 2:46 PM