Panasonic KX-TGA914EX Operating Instructions Manual

Also see for KX-TGA914EX: Operating instructions

Contents

Useful Information17TroubleshootingProblem Cause & solutionThe cordless camera doesnot work.L Check the connections (page 6).L The cordless camera is not registered to the base unit.Register the cordless camera to the base unit (page13).The cordless camera’sindicator is flashing red.L The cordless camera is not registered to the base unit.Register the cordless camera to the base unit (page13).L The cordless camera is out of range. Locate thecordless camera near the base unit.The image is faint. L The camera lens is dirty. Clean it with a soft dry cloth.L Do not touch the lens directly. Fingerprint may cause anunclear image.The image sent from thecordless camera is poor onthe handset display.L Adjust the display brightness setting (page 12).L The place where the cordless camera is located is dark.Improve lighting.The image sent from thecordless camera is dark anddifficult to see on thehandset display.L Adjust the display brightness setting (page 12).L There is a strong sunlight or a backlight in the placewhere the cordless camera is located. Try shading thecamera’s location.I cannot connect to thecordless camera, the imagedistorts, or the image isslow.L The cordless camera has lost communications with thebase unit. Move the cordless camera closer to the baseunit, and try again.L There is an obstacle such as concrete wall. Move thecordless camera to the place without an obstacle.L A microwave appliance is in use. Move the cordlesscamera closer to the base unit or use the cordlesscamera away from that appliance, and try again.The camera sensor does notrespond.L If you set the audio detection sensitivity to off, thecamera sensor does not respond. Turn this feature on(page 12).L While a handset is monitoring the cordless camera, thecordless camera stops detecting sound.I pressed the call button butthe cordless camera doesnot page the handsets.L While the image of the cordless camera is beingmonitored by a handset, the call button will not haveresponse.TGA914EX_for_TG9140EX_1(e).book Page 17 Tuesday, August 8, 2006 11:33 AM