Making/Answering Calls14 Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333Making calls1 Lift the handset and dial the phonenumber.L To correct a digit, press {C}.2 {C}3 When you finish talking, press {m} orplace the handset on the base unit orcharger.Adjusting the receiver volumePress {^} or {V} repeatedly while talking.Making a call using the redial listThe last 10 phone numbers dialled are storedin the redial list (each 24 digits max.).1 {R}2 {r}: Select the desired phone number.L When the number matches a phonenumber stored in the phonebook, thestored name in the phonebook isdisplayed.3 {C}Editing/erasing/storing numbers inthe redial list1 {R}2 {r}: Select the desired phone number.s {j/OK}3 Proceed with the desired operation.■ Editing a number before calling:{r}: “Edit & Call” s {j/OK} sPress {3} or {4} to move the cursor.s Edit the number. s {C}■ Erasing a number:{r}: Select “Erase” or “Erase All”.s {j/OK} 2 times s {m}■ Storing a number to thephonebook:{r}: “Save TEL No.” s {j/OK}s To store the name, continue fromstep 3, “Adding entries”, page 16.Note:L When editing:– To erase a number, place the cursor tothe right of where you want to erase thenumber, then press {C}.– To insert a number, place the cursor tothe right of where you want to insert thenumber, then press the appropriate dialkey.Pause (for PBX/long distance serviceusers)A pause is sometimes required when makingcalls using a PBX or long distance service.When storing a calling card access numberand/or PIN in the phonebook, a pause is alsoneeded (page 16).Example: If you need to dial the line accessnumber “0” when making outside calls with aPBX:1 z s {P}2 Dial the phone number. s {C}Note:L A 3 second pause is inserted each time {P}is pressed. Repeat as needed to createlonger pauses.Answering calls1 Lift the handset and press {C} when theunit rings.L You can also answer the call bypressing any dial key from z to 9, *,or y. (Any key answer feature)2 When you finish talking, press {m} orplace the handset on the base unit orcharger.Auto talkYou can answer calls simply by lifting thehandset off the base unit or charger. You donot need to press {C}. To turn this feature on,see page 18.TGB21xE(en).book Page 14 Wednesday, April 9, 2014 11:53 AM