Panasonic KX-TGE260 Quick Manual

Also see for KX-TG454SK: Operating instructions Operating instructions Service manual Service manual Quick guide

Contents

Panasonic KX-TGE260 Quick Manual Manual pdf 4 page image

– 4 –Pairing a Bluetooth cellular phone1 Handset:For CELL 1: {MENU}(6241For CELL 2: {MENU}(6242L After the corresponding CELL indicator on the base unit starts flashing, the rest of theprocedure must be completed within 5 minutes.2 Your cellular phone:While the corresponding CELL indicator is flashing, follow the instructions of your cellularphone to enter the pairing mode.L Depending on your cellular phone, it may ask you to enter the Bluetooth PIN (default:“0000”). If your cellular phone shows PassKey confirmation on its display, follow thedirections to proceed.3 Handset:Wait until a long beep sounds.L It may take more than 10 seconds to complete pairing.L When the corresponding CELL indicator lights up, the cellular phone is connected to thebase unit. You are ready to make cellular calls.4 {OFF}Note:L Make sure that your cellular phone is set to connect to this product automatically. Refer to yourcellular phone’s operating instructions.Base unit: CELL indicatorsStatus MeaningOn A cellular phone is connected. Ready to make/receive cellularcalls.Flashing − The cellular line is in use.− Phonebook entries are being copied from a cellular phone.− The base unit is searching for the paired cellular phone.− The base unit is pairing a cellular phone.− A cellular call is put on hold.Flashing rapidly A cellular call is being received.Light off − A cellular phone is not paired to the base unit.− A cellular phone is not connected to the base unit.Handset: Link to cell display itemstd A cellular line is in use.*1L When flashing: The cellular call is put on hold.L When flashing rapidly: A cellular call is being received.*1 Corresponding cellular line(s) is(are) indicated next to the item.xd A cellular phone is connected.*1 Ready to make/receive cellular calls.L When turned off: A cellular phone is not connected to the base unit.*1 Corresponding cellular line(s) is(are) indicated next to the item.uv − A cellular call is being done on that line.− The cellular line is selected for the setting.Link to cell