– “Alarm” (default: On)This feature can be set for each unit.1 For handset: MMENUN#2782 MbN: Select the desired setting and press MSELECTN.R “ ” is displayed next to enabled items.R To disable an item, select it and press MSELECTN again. “ ”disappears.3 MSAVEN a MOFFNUsing assistive listening devicesIf you use hearing aids that are compatible with a neckloop, you canconnect your neckloop to a handset and enjoy hands-free conversations.When talking on the phone, you can speak using the neckloop’smicrophone or the handset’s microphone depending on the neckloop’sfeatures and the handset’s settings.– Hearing aids that are equipped with a telecoil (T-coil)– Audio neckloops with a 3-pole, 2.5 mm plug– Audio neckloops with a 3-pole, 3.5 mm plug*1*1 In this case, a 3-pole 3.5 mm to 3-pole 2.5 mm adaptor is required.To use with a T-coil-equipped hearing aid1 Set your hearing aid to the "T" setting.R Refer to your hearing aid’s operating instructions for details.2 Hold the handset near your hearing aid when talking.To use a neckloopWhen using a neckloop with the handset, you can speak using theneckloop’s microphone or using the handset’s microphone.Important:R You must set the headset type before use (page 20).1 Connect the neckloop to the headset jack on the side of the handset.For assistance, please visit http://shop.panasonic.com/support 19AccessibilityTGMA44_45(en)_0606_ver101.pdf 19 2016/06/06 16:11:27