Setting Up19Setting up the handsetConnecting the chargerL Use only the supplied Panasonic ACadaptor PQLV219E.Battery installationL USE ONLY Ni-MH batteries AAA(R03) size.L Do NOT use Alkaline/Manganese/Ni-Cd batteries.L Confirm correct polarities (S, T).Battery chargeCharge for about 6 hours.L When the batteries are fully charged,the charge indicator goes off.Note when setting upNote for connectionsL The AC adaptor must remainconnected at all times. (It is normal forthe adaptor to feel warm during use.)L The AC adaptor should be connectedto a vertically oriented or floor-mounted AC outlet. Do not connectthe AC adaptor to a ceiling-mountedAC outlet, as the weight of the adaptormay cause it to become disconnected.L The unit will not work during a powerfailure.Note for battery installationL Use the supplied rechargeablebatteries. For replacement, werecommend using the Panasonicrechargeable batteries noted in theUser Guide on the Panasonic Website. See page 3 for Panasonic URL.L Wipe the battery ends (S, T) with adry cloth.L Avoid touching the battery ends (S,T) or the unit contacts.(220-240 V AC,50/60 Hz)HooksRechargeable Ni-MH ONLYConfirm“Charging”is displayed.Charge indicatorVoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299