Panasonic KX-TH111 Operating Instructions Manual

Also see for KX-TH111: Installation manual

Contents

Panasonic KX-TH111 Operating Instructions Manual Manual pdf 41 page image

Programmable SettingsFor assistance, please visit http://www.panasonic.com/phonehelp 41Note:L If you subscribe to Caller ID service andwant to view the caller’s information onthe handset display after lifting up thehandset to answer a call, turn off thisfeature.Caller ID number auto editY ^You can turn the Caller ID number autoedit feature on or off.1 {MENU} (center of joystick) i h i{SELECT}2 “Caller ID edit” i {SELECT}3 Select the desired setting. (Default:“On”) i {SAVE} i {OFF}1 {MENU} i h i {SET}2 “Caller ID edit” i {SET}3 Select the desired setting. (Default:“On”) i {SET} i {STOP}Setting telephone line Y ^Flash timeThe flash time depends on your telephoneexchange or host PBX.L You only need to program this settingonce, using either the handset or baseunit.Important:L The setting should stay at 700 ms unlesspressing {FLASH} fails to pick up theCall Waiting call.1 {MENU} (center of joystick) i h i{SELECT}2 “Set tel line” i {SELECT}3 “Set flash time” i {SELECT}4 Select the desired setting. (Default:“700ms”) i {SAVE} i {OFF}1 {MENU} i h i {SET}2 “Set tel line” i {SET}3 “Set flash time” i {SET}4 Select the desired setting. (Default:“700ms”) i {SET} i {STOP}Note for handset and base unit:L If the unit is connected via a PBX, certainPBX functions (call transferring, etc.)may not work correctly. Consult yourPBX supplier for the correct setting.Line modeGenerally, the line mode setting should notbe adjusted.When another phone connected to thesame line is in use, and– if S is not displayed on thehandset, or– if the IN USE indicator on the base unitdoes not light properly,you need to change the line mode to “A”.L You only need to program this settingonce, using either the handset or baseunit.1 {MENU} (center of joystick) i h i{SELECT}2 “Set tel line” i {SELECT}3 “Set line mode” i {SELECT}HandsetBase unitHandsetBase unitHandset