Panasonic KX-TS600EX Operating Instructions Manual

Settings108 Press [#] to select “AM”, “PM” or 24-hourclock.(Example: You select “PM”.)• Each time you press [#], the selection willchange on the display.9 Press [OK] (Next key).10 Enter the current day and month usinga 4-digit number.(Example: To set Dec. 27, enter “2712”.)11 Press [OK] (Save key).• A long beep sounds.• The clock starts working.• The display will return to step 2. To exitthe programming mode, press [ ] orwait for 60 seconds.• You can go back to the previous screen by pressing [3], when setting the timeand date (steps 4 through 10).• If 3 beeps sound when entering the time and date, the time and date entered arenot correct. Enter the correct time and date.• If the selected LCD language is Dutch (p. 11), the day and month will display as“day/month”.If the batteries installed in the unit expired, the time and date will be shown as“12:00AM 31.12” or “0:00 31.12”, and “ ” will flash. Replace the batteriesthen adjust the time and date.For Caller ID service users (p. 18)If a time display service is available with the Caller ID service:• The Caller ID information will re-set the clock after the ring if the adjusted timeand/or date is incorrect and when the Time Adjustment is set to ON (p. 14). Ifthe time/date has not previously been set, the Caller ID information will notadjust the clock.#=AM/PM/24HPM34 [OK]=NextOptionDisplayPMAMAMPM24H 24-Hour clockEnter day.month31.123 [OK]=SaveEnter day.month27.123 [OK]=SaveTS600EX.book Page 10 Wednesday, April 5, 2006 12:25 PM