Panasonic KX-TS730AZ Operating Instructions Manual

Making/Answering Calls11Making calls1 Press {s}.L IN USE indicators will light in green.2 Dial the phone number.3 When finished talking, press {s}.Note:L At the beginning of a call, both partiesshould speak alternately. This enablesthe unit to adapt to its environment andlet both parties speak effectively.L If the other party has difficulty hearingyou, press {<} to decrease the speakervolume.L Use the unit in a quiet room.To adjust the speaker volumePress {<} or {>} repeatedly during aconversation. 16 levels (high to low) areavailable. “Receiver volume” isdisplayed.To dial after confirming the enterednumber1 Enter the phone number.L To correct a digit, press {CLEAR}.Enter the correct number.L If a pause is required when dialling,press {PAUSE} where needed.L To cancel, press and hold {CLEAR}until the entered phone numberdisappears.2 Press {s} or {CALL} ({F1} key).3 When finished talking, press {s} tohang up.To redial the last number dialled1 Press {s}.2 Press {REDIAL}.To make a call using the redial listThe last 10 phone numbers dialled arestored in the redial list.1 Press {REDIAL}.L The last number dialled will bedisplayed.2 Press {<} or {>} repeatedly to displaythe desired number.ORPress {REDIAL} repeatedly to displaythe desired number.L To delete the displayed item, press{ERASE} ({F1} key).L To exit the list, press {STOP}.3 Press {s} or {CALL} ({F3} key).PAUSE button (for PBX/longdistance service users)A pause is sometimes required whenmaking calls using a PBX or long distanceservice.For example, if you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 Press {9}.2 Press {PAUSE}, then dial the phonenumber.3 Press {s} or {CALL} ({F1} key).Note:L A 3.5 second pause is inserted eachtime {PAUSE} is pressed. Pressrepeatedly to insert longer pauses.{REDIAL}{PAUSE}{s}{MUTE}{CLEAR}{<} {>}Speaker{RECALL}