Panasonic KX-TS730C Operating Instructions Manual

Making/Answering Calls10Answering callsWhen a call is being received, the IN USEindicators flash.1 Press {s}.2 When finished talking, press {s}.Adjusting the ringer volume4 levels (high/medium/low/off) areavailable. To change the ringer volumesetting, see page 19.ORWhile a call is being received, press {<}or {>} repeatedly to select the desiredvolume.Useful features during acallMUTE buttonYou can mute your voice during aconversation. While mute is turned on youwill be able to hear the other party, but theother party will not be able to hear you.To mute your voice, press {MUTE}.L “-Mute-” will be displayed and the INUSE indicators will light in red.L To return to the conversation, press{MUTE}.Flash buttonPressing {FLASH} allows you to usespecial features of your host PBX such astransferring an extension call, or accessingoptional telephone services such as CallWaiting.Note:L To change the flash time, see page 20.For Call Waiting service usersTo use Call Waiting, you must subscribe toCall Waiting service from your telephoneservice provider.This feature allows you to receive callswhile you are already talking on the phone.If you receive a call while on the phone,you will hear a Call Waiting tone.Press {FLASH} to answer the 2nd call.L The 1st call is put on hold while youanswer the 2nd call.L To switch between calls, press{FLASH}.Note:L Please contact your telephone companyfor details and availability of this servicein your area.L This unit does not support Visual CallWaiting.Temporary tone dialing (forrotary/pulse service users)You can temporarily switch the dialingmode to tone when you need to accesstouch tone services (for example,answering services, telephone bankingservices, etc.).Press {*} (TONE) before entering accessnumbers which require tone dialing.Note:L The dialing mode will return to pulsewhen you hang up.E-PQQX14855ZA.book 10 ページ２００５年７月２９日金曜日午後７時１３分