Customizing the TelephonePhonebook ListAdding a New Phonebook EntryYou can add a maximum of 500 (for KX-UT123/KX-UT133/KX-UT136/KX-UT248) or 100 (forKX-UT113) phonebook entries to the unit.To make a call from the phonebook, see "Making a Callfrom the Phonebook List (Page 25)".1. Press .2. PressAdd .3. Enter a name (max. 24 characters), and then press[ENTER].4. Press [ ] or [ ] to select the phone number type(A to E) or "Ringtone X", and then press[ENTER].5. Do one of the following, depending on yourselection in the previous step:If you selected a phone number type• Enter the phone number (max. 32 digits), andthen press [ENTER].If you selected "Ringtone X"• Select a ringtone to play when you receive a callfrom this party, and then press [ENTER].6. To add another phone number to the entry, repeatthe procedure from step 4.7. PressSave .Note• If you store multiple phone numbers in the entry,you can assign the preferred number to usewhen you call this party. In step 4, select thedesired number, and then pressPrefer .• If you do not press any buttons for 1 minute, theunit will return to stand-by mode.Adding a Phonebook Entry fromthe Incoming or Missed Call LogYou can add new phonebook entries from the incomingor missed call log.1. PressCall Log .2. Press [ ] or [ ] to select "Incoming Call Log"or "Missed Call", and then press [ENTER].3. Press [ ] or [ ] to select the desired call log entry,and then pressSave .4. Select "Phonebook", and then press [ENTER].5. Enter a name (max. 24 characters), and then press[ENTER].6. Press [ ] or [ ] to select the phone number type(A to E) or "Ringtone X", and then press[ENTER].7. Do one of the following, depending on yourselection in the previous step:If you selected a phone number type• Enter the phone number (max. 32 digits), andthen press [ENTER].If you selected "Ringtone X"• Select a ringtone to play when you receive a callfrom this party, and then press [ENTER].8. To add another phone number to the entry, repeatthe procedure from step 6.9. PressSave .Note• If a name is stored in the call log, it isautomatically entered in step 5.• If you store multiple phone numbers in the entry,you can assign the preferred number to usewhen you call this party. In step 6, select thedesired number, and then pressPrefer .• If you do not press any buttons for 1 minute, theunit will return to stand-by mode.Editing a Phonebook EntryYou can edit the information stored in phonebookentries.1. Press .2. Press [ ] or [ ] to display the desired entry, or pressSearchand search for the desired entry (Page 37).3. Do one of the following, depending on your unit:For KX-UT113/KX-UT123 users• PressMenu , select "Edit", and then press[ENTER].For KX-UT133/KX-UT136/KX-UT248 users• PressEdit .4. Press [ ] or [ ] to select the item you want to edit,and then press [ENTER].36 Operating Instructions Document Version 2012-02Customizing the Telephone